THE ORIGINAL STALLION TRUNNION
Stop Handling, Start Machining. A Stallion Trunnion Table will allow you to maximize the efficiency of your vertical machining center and rotary table. With full 360-degree rotation, machining multiple sides of a part becomes possible, allowing your operators to handle a part as little as necessary. The 4th Axis fixtures will bolt directly to the faceplate of any indexer on the market, allowing for an easy setup when it arrives at your plant. While there are standard sizes, we can manufacture your Trunnion to be any size in between and up to 10’ in length.
Stallion Double Sided
Ideal for high volume jobs and allows for double station vises to be mounted on both faces. Riser blocks recommended.
|
Stallion 9-23QC
Ideal for shops that run several different setups. Utilizes ball lock technology. Customize each quick change fixture plate for specific jobs.
|
Stallion 9-35
Ideal for larger parts and rotary tables. Has a 9" x 35" working surface that can be shortened if needed.
|
Stallion 10-30
Ideal for larger parts and rotary tables. Comes standard with the TS1200 hydraulic braking system.
|
Stallion 12-48
Our largest standard model, this fixture requires the TS3500 braking system and is made for the largest rotary tables on the market.
|
Stallion Hybrid
Our most versatile fixture, this setup allows you to never have to remove your trunnion.
|
STALLION SHELF UNITS
These entry level 4th axis fixtures are perfect for machine shops and manufacturers that are looking for a low cost, high volume solution. If you're worried that a full size trunnion table will take up your entire machine envelope, the Shelf Unit allows space for an additional 3 axis operation to be taken care of within the same machining center. Available featuring your preferred self centering workholding vise, these CNC fixtures can be customized to your needs. Available in single to four sided configurations.
|
|
STALLION 4TH AXIS TOMBSTONES
The Stallion Tombstone provides manufacturers with the ultimate time saver. With 4 sides, handling and tool change time decreases substantially. Every time a part is handled or indicated, there is an increased risk of scrapping it. The Stallion Tombstone minimizes this risk through 4th axis milling. With full 360-degree rotation, machining multiple sides of a part becomes possible, allowing your operators to handle a part as little as necessary.
MULTISIDED 4TH AXIS TRUNNIONS
The Stallion Multisided Trunnions can be made with 3, 6, or 8 sides. The advantage of multisided trunnions is twofold. First, an operator is able to load more parts per cycle than on a single or double sided. Second, tool clearance is greater than a single, double, or four sided, allowing for shorter tools and more rigidity. With full 360-degree rotation, machining multiple sides of a part becomes possible, allowing your operators to handle a part as little as necessary.
Braking systemsAs Trunnions increase in size, it becomes more difficult for the standard indexer brake to hold them in place. In light of this, we have engineered our very own hydraulic braking system to allow for heavy off center milling and drilling. With up to five times the clamping torque of a standard rotary table, you can be assured that your fixture will maintain rigidity throughout your manufacturing process. The brake resides on the outboard support of our Trunnions and clamps simultaneously with the indexer brake. We offer Pneumatic and Hydraulic options depending on the application.
|
